PVC-U Fittings

PVC Fittings
PVC Elbow 90° glue socket x glue socket
PVC-U angle 90 ° with glue socket. Our PVC angle 90 degrees with adhesive sleeve are intended to overcome corners in pipe and water pipes
from 0,22 EUR
 
incl. 19% tax excl. Shipping costs
PVC elbow 90° with V4A reinforcement ring - glue socket x female thread

PVC-U angle 90 ° with V4A reinforcment ring. Our PVC angles 90 degrees with internal thread are ideal for releasable corner joints.
from 0,99 EUR
 
incl. 19% tax excl. Shipping costs
PVC Elbow 90° glue socket x male thread
PVC Elbow 90° glue socket x male thread. Our PVC angle 90 degrees with external thread are ideal for releasable corner joints.
from 0,99 EUR
 
incl. 19% tax excl. Shipping costs
PVC Elbow 90° reduced, glue socket/glue spigot x glue socket

PVC angle reduced by 90 °, comes with adhesive sleeve on both sides. The PVC angle 90 ° reduced is ideal to reduce, for example, the flow.
from 1,21 EUR
 
incl. 19% tax excl. Shipping costs
PVC Elbow 90° with drain top, glue socket x glue socket
PVC angle 90 ° with side or on-top drain top, available as internal or external thread outlet. Ideal for emptying pipes.
from 4,48 EUR
 
incl. 19% tax excl. Shipping costs
PVC Elbow 45° glue socket x glue socket
Our PVC elbow 45 degrees with adhesive sleeve come to you in industrial quality. PVC angle 45 ° are used for PVC piping to change the flow direction.
from 0,35 EUR
 
incl. 19% tax excl. Shipping costs
PVC Elbow 45° with V4A reinforcement ring
PVC Elbow 45 degree with V4A reinforcement ring glue socket x female thread. This PVC angle is ideal as a detachable connection in your pipeline, as it has both an internal thread and an adhesive socket.
from 1,98 EUR
 
incl. 19% tax excl. Shipping costs
PVC bend 90 degrees made from tubing, glue Socket x glue Socket
PVC bend 90 ° made from tubing with glue socket. The ideal solution for higher flow rates. EU manufacturer in industrial quality.
from 1,33 EUR
 
incl. 19% tax excl. Shipping costs
PVC Bend 45° PN 10 made from tubing, glue socket x glue socket

PVC bend 45 ° pulled out of pipe, have a better flow than a PVC angle. Precision molded in industrial quality. EU manufacturer
from 1,24 EUR
 
incl. 19% tax excl. Shipping costs
PVC bend 90°, PN 16, injection moulded, glue socket x glue socket
PVC bend 90 ° - injection molding with adhesive socket. Thicker wall than with arch made of pipe. Stable, for better flow at 90 ° bends.
from 1,16 EUR
 
incl. 19% tax excl. Shipping costs
PVC Y-Piece PN10 with glue socket
PVC-U Y-piece, the PVC Y-piece is used as a branch in water pipes. Even pressure distribution thanks to Y construction.
from 2,98 EUR
 
incl. 19% tax excl. Shipping costs
PVC Y-Piece with glue socket
PVC Y-bend injection molded, ideal as a distributor in your pipe system, the construction of the pressure is particularly evenly distributed and comes where you need it.
from 2,89 EUR
 
incl. 19% tax excl. Shipping costs
PVC Tee 90° with glue sockets
Our PVC Tee is ideal as a branch within a piping system. With the PVC T-piece it is possible to integrate a crotch in your pipeline.
from 0,33 EUR
 
incl. 19% tax excl. Shipping costs
PVC tee 90° with V4A reinforcement ring, glue socket x female thread
PVC T-piece with internal thread. Our internally threaded PVC t-pieces and stainless steel reinforcement ring are perfect for piping that needs opening occasionally.
from 1,59 EUR
 
incl. 19% tax excl. Shipping costs
PVC T-piece 90 degrees with adhesive sleeve Reduced consisting of 2x adhesive sleeve Normal and 1x adhesive sleeve Reduced. Ideal for irrigation systems.
from 0,49 EUR
 
incl. 19% tax excl. Shipping costs
PVC tee 45° glue socket x glue socket
PVC T-piece 45 degrees with adhesive sleeve serves as a branch within your piping system. For this, the PVC T-piece is glued 45 degrees with PVC pipe.
from 1,89 EUR
 
incl. 19% tax excl. Shipping costs
PVC Cross Piece with glue Socket
PVC-U cross piece, 4-way PVC cross piece for branching in piping systems. PVC fittings made of high quality material.
from 0,92 EUR
 
incl. 19% tax excl. Shipping costs
PVC-U socket, straight connector for PVC pressure pipes. The PVC sleeve is used to glue, for example, two pressure pipes.
from 0,28 EUR
 
incl. 19% tax excl. Shipping costs
PVC End Glue Cap
PVC adhesive cap, end cap made of high quality PVC-U, also suitable for industry and craft. Buy certified PVC-U fittings from your dealer at a low price.
from 0,22 EUR
 
incl. 19% tax excl. Shipping costs
PVC Threaded Plug PN 10
PVC threaded plug, the plug (male thread) made of PVC-U serves as an end closure for piping systems which have an internal thread to the end.
from 0,39 EUR
 
incl. 19% tax excl. Shipping costs
Show 1 to 20 (from a total of 43 products)

PVC Fittings - Angles, bends and tees in a large selection

When you buy PVC fittings in our online store, you benefit from the large selection. You can order tailor-made PVC fittings for your needs. Opt for PVC fittings that allow you to install PVC tank penetrations. You get the PVC fittings in different thicknesses for the perfect fit of the PVC fittings. PVC is a durable material that can be used in a variety of outdoor and indoor environments. The material is not suitable for PVC fittings and PVC tank bushings, which are used in industry and plant construction, but also in swimming pool construction.

Flexible use of PVC angle

We offer PVC angles with a degree of curvature of 45 ° or 90 °. The versions differ in the individual products. If you decide to buy PC brackets with an adhesive sleeve, you have a wide range of diameters between 12mm and 110mm. If you require a version with an adhesive socket and reinforced internal thread, diameters from 20 mm to 63 mm are offered. The PVC angles are available with an internal thread of 1/2 '' to 2 ''.
PVC angle with adhesive sleeve and external thread you get with an angle of 90 °. Diameters of 50 mm and 63 mm are offered. The thread is available with 1 1/2 '' or 2 ''. The angles are perfect for installing safe PVC fittings.

PVC fittings as a T-piece for various purposes

PVC fittings are available in the shop with a curvature of 45 ° and 90 °. The PVC fittings are available in diameters between 12mm and 110mm. Among other things, they are used in the installation of PVC tank feedthroughs. If you would like to install PVC tank feedthroughs, you will need PVC fittings that are matched in diameter to the outlets of the tank. PVC tank bushings must be adapted to the existing construction. Otherwise it is not possible to install a safe and working system.